News

Peroxide News
 
Organic peroxides & polymerization...

>> more info

Director's Desk
 
From the director's courtesy...

>> more info
 


Welcome to Plasti Pigments Products section.

Products are categorized as below...


Plasperox BP-50 (BENZOYL PEROXIDE PASTE)

Properties   |   Applications   |   MSDS

Material Safety Data Sheet:

SECTION I – MANUFACTURERS / SUPPLIERS DATA
Name M/s. Plasti Pigments Pvt. Ltd
Address 401, Sai Chambers, 365/367 Narsi Natha Street, Mumbai – 400 009.
State & Country Maharashtra, India.
Telephone No. +(9122) 2344 3688 / 2343 7890
Fax No. +(9122) 2342 4780
E-mail pppltd@vsnl.com
Contact Person Mr.Hiren Dhruva / Mr.Mohan Pawar
 
SECTION II – CHEMICAL IDENTITY
Chemical Name Benzoyl Peroxide Paste
Trade/Shipping Name Plasperox BP - 50
Formula C14H10CO4
U.N. No. 2087
Label Yellow
Hazchem Code 5.2
 
SECTION III – PHYSICAL / CHEMICAL DATA
Physical State Highly Viscous Paste
Appearance White Creamy Paste
Melting Point Non Relevant
Density 1130Kg/cubic meter
Bulk Density 465 cubic meter
Solubility Halogenated Hydrocarbons, Ketones, Other Aromatic Hydrocarbons.
InSolubility Water
Ph Neutral
 
SECTION IV – THERMAL DATA
Critical Temprature SADT 70 degrees C
Kick-Off Temprature 50 degrees C
Storage Temprature Less thatn 20 degrees C
 
SECTION V – REACTIVITY DATA
Incompatibility with Other Material Do not mix directly with heavy metal compound, eg. Accelerators, emines and other materials having a decomposing effect. 
Hazardous Products Heat or Shock may cause fire or explosive decomposition.
 
SECTION VI – HEALTH HAZARD DATA
Routes of Entry EYES, Skin and Mouth.
Effects Irritates
Emergency Treatments:  
Eyes Flush immediately with liberal quantities of water.  Check with
Physician
Skin In case of contact with skin, wash immediately with soap and water. 
Mouth Ingestion If a peroxide is swallowed consult a Physician immediately
 
SECTION VII – PREVENTIVE MEASURES
Personal Protective Equipments Avoid contact with skin or eyes and always wear Rubber Gloves and Goggles
Handling and Storage Precautions Benzoyl Peroxide Paste is not an explosive material. It decomposes very slowly even at room temperature into radicals.  Store in a cool place in original container away from all sources of heat.  Protect from open fire, steam pipes, radiators and direct sunlight.  Benzoyl Peroxide Paste should not be stored with acids, accelerator or easily oxidized material.
 
SECTION VIII – EMERGENCY / FIRST AID MEASURES
   
Fires In case of fire saturate the paste with coarse water spray, foam, coolant or carbon dioxide extinguishers may be used.
Exposures Please refer Section VII – Preventive Measures.
Spill/Waste Disposal A drum of vermiculite or Perlite is to be used to soak up spillage.
After the spill is absorbed, the material should be disposed of by having a trench in an isolated area and may be ignited with a  kerosene-soaked rag at the end of 6 – feet steel rod.  Add to the the peroxide gradually about 10 times its weight of a 10% Sodium Hydroxide solution.  Agitation will break up any lums that may form.

 

 

 
 

  © Copyright 2005. Plasti Pigments Pvt. Ltd. All Rights Reserved. This Commercial concept has been exclusively designed by Vinay Patel. (vin_gee2@yahoo.com)