News

Peroxide News
 
Organic peroxides & polymerization...

>> more info

Director's Desk
 
From the director's courtesy...

>> more info
 


Welcome to Plasti Pigments Products section.

Products are categorized as below...


Plasperox K-7 (METHYL ETHYL KETONE PEROXIDE)

Properties   |   Applications   |   MSDS

Material Safety Data Sheet:

SECTION I – MANUFACTURERS / SUPPLIERS DATA
Name M/s. Plasti Pigments Pvt. Ltd
Address 401, Sai Chambers, 365/367 Narsi Natha Street, Mumbai – 400 009.
State & Country Maharashtra, India.
Telephone No. +(9122) 2344 3688 / 2343 7890
Fax No. +(9122) 2342 4780
E-mail pppltd@vsnl.com
Contact Person Mr.Hiren Dhruva / Mr.Mohan Pawar
 
SECTION II – CHEMICAL IDENTITY
Chemical Name Methyl Ethyl Ketone Peroxide
Trade/Shipping Name Plasperox K - 7
Formula C8H16 O4
U.N. No. 2127
Label Yellow
Hazchem Code 5
 
SECTION III – PHYSICAL / CHEMICAL DATA
Physical State Liquid
Appearance Colourless
Boiling Point 111 degree C
Melting Point Less than 30 degrees C
Specific Gravity 1.168 @ 20 degrees C
Viscosity 16.0 cups @ 25 degrees C
Solubility in water @ 30 degrees C Insoluble
Ph Neutral
 
SECTION IV – THERMAL DATA
Critical Temprature SADT 50 degrees C
Kick-Off Temprature ca 75 degrees C
Storage Temprature Less than 30 degrees C
 
 
SECTION V – HEALTH HAZARD DATA
Routes of Entry Eyes, Skin and Mouth.
Effects Irritates
Emergency Treatments:  
Eyes Rinse immediately with large quantity of water and with a 2%
solution  of Sodium Bicarbonate or 10% solution of Ascorbic Acid.
Skin Skin that comes in contact with PLASPEROX K - 7 should be washed immediately with a large quantity of water.  If available 5% Soda solution may be used. 
Mouth Ingestion If a peroxide is swallowed, induce vomiting and administer 100ml
of fresh solution of Sodium Ascorbate.
- - -  IN ALL CASES CONSULT  A PHYSICIAN IMMEDIATELY  - - - 
 
SECTION VI – PREVENTIVE MEASURES
Personal Protective Equipments Avoid contact with skin or eyes and always wear Rubber Gloves and Goggles
Handling and Storage Precautions Store away from manufacturing area and separated from materials which could induce decomposition.  Store it in original container in a cool dark place.
 
 
SECTION VII – EMERGENCY / FIRST AID MEASURES
Fire:  
 - Small Fires Use dry chemical foam or Carbon di Oxide extinguishers or Sand.
 - Large Fires Evacuate area and apply large amounts of water from safe distance.
Exposures Please refer Section V – Health Hazard Data
Spill/Waste Disposal Clean up immediately absorb on inert material such as Pertite or Vermiculite.Dilute MEKP to 10% Assay or 1% A.O. in fuel oil, Common Hydro Carbon solvent and incinerate.

 

 

 
 

  © Copyright 2005. Plasti Pigments Pvt. Ltd. All Rights Reserved. This Commercial concept has been exclusively designed by Vinay Patel. (vin_gee2@yahoo.com)